Hot Tub Chemicals

Best Hot Tub Chemicals

Buying a hot tub is a good decision to make. You can soak and relax your worries away, what with the warm water and the massage jets you can get out of it. However, you have to pay special attention to the maintenance and care of your hot tub. If you can maintain and clean with the right hot tub chemicals, you will enjoy the pleasures for years to come.

The simplest way to maintain your tub is to make a schedule of chemical treatments and clean it regularly. Doing so will make your tub experience more enjoyable and it will also cost you less in long-term maintenance.

The best time to set a schedule is right after you have your tub installed. Once it is ready to go, fill your hot tub with water, and set to at least 75 degrees Fahrenheit then add the recommended chemicals. If you purchased your hot tub from a dealer of top brands like Sundance or Caldera, you will be provided with a kit, which is the only one you will ever need for the first basic maintenance with chemicals. The first test you will need to do is to check the water acidity of pH level. The best pH range is 7.2 to 7.8 for optimum balance. You can adjust the pH level if yours is outside of the recommended ranges by just bringing it up or down along the ideal level.

Hot Tub Chemicals For Cleaning

You should also keep a supply of stain clearing products and scale buildup solutions. These have to be added according to the instructions and recommendations of your hot tub manufacturer, though. You would also need a water clarifier, which you do not have to use a lot of at one time. Adding these to your chemicals will greatly minimize scum or film at the water line when you use the tub.

It is also very important to keep the hot tub sanitized. You can use chlorine or bromine to keep the perfectly sanitary conditions when you soak. But keep in mind to avoid mixing and matching both chemicals. You have to choose just one, chlorine or bromine, and continue using it for the rest of your spa’s life. After your first chemical balancing, you can add an ounce or two when you clean your tub at least twice a week, this way your hot tub water will be properly sanitized. Maintain a regular testing regimen to ensure ideal chemical balance for your hot tub.

You will need an entirely different set of chemicals for complete hot tub cleaning. It is also highly recommended to drain your spa completely at least three times a year so that you can do a full cleaning. If you want to save on cleaning chemicals, you can make do with an overall cleaning using sponges, bleach and water, which you need to follow through with deep rinsing. Keep the filters in mind as well. You have to clean your hot tub filters monthly, and keep a spare filter on hand so that you can still use your hot tub while the dirty one is being soaked in a special solution for 24 hours.

Maintaining this cleaning regimen using chemicals will assure you that your hot tubbing fun time will continue being pleasurable and relaxing.